Part Search/Crossreference | Product Catalogs | How to Buy | Our Brands | Contact Us

Product Overview

Industrial Filter Media Solutions

Microfiltration Solutions

Venting Solutions

Contact Us

Product Literature

Customer Support

News

Events



News
24/05/2007     

Donaldson Filter Components Ltd
7 The Parks
Newton le Willows, WA12 0JQ, England

Jenny Nash

+44 (0) 1942 711711

FOR IMMEDIATE RELEASE

DONALDSON MEMBRANES SHOWS COLORES CERÁMICOS THE COLOUR OF SUCCESS WITH EPTFE FILTER MEDIA

Donaldson Membranes’ ePTFE filter media has given a new lease of life to a filter employed in the production of dyestuffs for the ceramics industry at Colores Cerámicos, situated in Castillon, Spain.

Colores Cerámicos, an expert producer of dyestuffs and serigraphy for use in the ceramic industry, is committed to ongoing research and development to ensure maximum performance of their processes. As part of this drive for continuous improvements, the Company chose to optimise the performance of a bag filter in a spray dryer process.

The very fine enamel powder dust produced at the spray dryer was able to penetrate the filter media, clogging the fabric, and causing high pressure drop across the filter. This was leading to reduced production rates and a useful bag life of less than four months.

Donaldson Membranes was asked to inspect the filter, which contains 176 bags with a filtration area of 180m2, manufactured from conventional glazed surface Polyester Needlefelt. The cleaning system is by on/line pulse jet, dust loading is 60g/m3 and air/cloth ratio is 0.83m/min. The operating temperature is 120-130°C with a peak of 133°C.

Donaldson Membranes’ Sales Manager for Iberia, Jordi Ezquerro, proposed to replace the previously installed bags with filter bags manufactured from Donaldson Membranes Product code # 6214, Polyester Needlefelt with Tetratex ePTFE membrane surface.

The filter bags, manufactured by Spanish bag maker, ACMA, are still working to desired performance levels after more than 24 months in operation, an excellent improvement of bag life compared with the life of the previous bags. Pressure drop is maintained below 150mm w.c. with emission levels well below the required 20mg/Nm3.

Mr. Ezquerro said: " We were confident that our media would solve the problem of bag fabric clogging and would extend the useful life of the filter bags - and Tetratex # 6214 has proved to be a successful solution to the problems."

Mr. Angel Badenas, Production Manager at Colores Cerámicos, is pleased with the results and has commented: "We are extremely satisfied with the performance of the #6214 filter bags. The results after more than 24 months have completely fulfilled expectations from both a lifetime and performance point of view."



About Donaldson | Careers | Investors | Suppliers
Select a Region:  
  

©2002-2010 Donaldson Company, Inc. | Privacy Policy | Terms and Conditions